On the latest version of windows and even some of the oldest, there is a common problem that pops up over and over again that mutes your PC’s speakers. If you’ve experienced this problem, then you are already familiar with the ‘No Audio Output Device is installed” error. The issue became especially common after the Windows 1903 update back in 2019.
The issue, in most cases, is caused by faulty drivers, or buggy Windows update. You can solve the issue on your Pc by following the solution guides below
Restart Windows Audio Service
Step 1: Press the windows button and R, and type services.msc when the dialogue box pops up. Click ok to open the services console.
Step 2: Scroll down until you find Windows audio services and then right click and check properties.
Step 3: Make sure to check that its startup type is set to automatic, and then restart.
Step 4: Repeat the same steps for Windows audio endpoint service.
If it was an audio service error, the no audio output device is installed and should not pop up again.
Use The Windows Audio Troubleshooter
Believe it or not, Windows has its very own audio troubleshooter reserved for this sort of problems. If restarting Audio Service doesn’t work, then start up the troubleshooter.
Step 1: Right click on the speaker button, and then click on troubleshoot sound problems
Step 2: The troubleshooter will load and search for possible issues.
Step 3: It should automatically solve the problem if it’s able to. Otherwise, it will list out the issues once the diagnosis is complete.
Step 4: If there are other problems, click on the explore button and follow the instructions
Update, reinstall or install the appropriate audio Drivers
If the troubleshooter fails, the next step should be to confirm that the error is not caused by a buggy or outdated driver.
Step 1: Open the Device manager
Step 2: Right click on the audio driver, and uninstall it
Step 3: Restart your Pc and then wait for Windows to automatically install the driver for you
Step 4: If the problem persists, then try to manually install the driver after downloading the recommended driver update or software from your manufacturer’s page.
Use the official fix recommended by Microsoft
Microsoft has admitted that the latest updates of Windows 10 is buggy and plagued with the common no audio output device is found an error. To fix the issue, they recommend that you:
Step 1: Open the device manager by using the Search Bar
Step 2: Search for the Sound, video, and game controllers.
Step 3: Stop your search once you find a Realtek device or device in general with a yellow exclamation point.
Step 4: Select it, open the View menu, and select Devices by connection.
Step 5: You should find the parent device- typically titled Intel SST audio controller, right click the device and choose properties.
Step 6: If you find a driver with the version number 184.108.40.20655, then you have been sent the wrong driver.
Step 7: Uninstall the device, and tick the Delete the driver software from this device box, before you continue with the uninstallation.
When the driver has finished uninstalling, reboot your system.
Change the bit rate in Playback Devices
Step 1: Move the mouse cursor to the Windows taskbar, and right click on the sound icon.
Step 2: Click on playback devices from the menu
Step 3: Select the current playback device and double-click properties.
Step 4: Go to the advanced tab and change the bit-rate to 24bit/44100 Hz or 24bit /192000 Hz.
If it’s a bit rate problem, the issue should be resolved after restarting your PC.
Install a fresh version of Windows on your computer
If you have tried every single tip on this list and you still can’t get your speakers to produce audio, consider reinstalling a fresh new Windows operating system or upgrading your current one with a fresh newer version of the operating system. If the problem persists still, then its most likely a hardware problem
Try a different sound card
In rare cases that your no audio output device is installed error doesn’t resolve itself after software troubleshooting, then try replacing the sound card in your pc. You should notice an immediate change or result. If, however, the issue persists, perhaps you should consider taking your Pc down to the repair shop and have a professional tackle the issue.
How do I fix No audio output device installed?
- Restart audio services
- Try uninstalling and reinstalling the device driver
- Use the windows audio troubleshooting program
- Change the bit rate of the playback device
How do I enable an output device in windows 10?
Launch the Settings app, go to system and then to sound. Click on Manage sound Devices under Output, and select your preferred output device from the list of output devices listed.
What does no audio device enabled mean?
This most often means there is an issue with your audio drivers, and in rare cases, your sound card. When this message pops up, and it happens to be software related, it means you should update your drivers or install new ones in the event that the problem persists.
How do I reinstall my sound driver?
Search for the device manager in the search menu, scroll down till you find the audio driver, and uninstall it. Restart your device and Windows will try to help you reinstall it.
How do I open audio settings in Windows 10?
Right click on the volume icon on the edge of the taskbar, and click Sounds in the menu.
The no audio output device is installed error is one of the simpler Windows issues to troubleshoot. If you dutifully follow this guide, and refer back to it whenever you need additional help, you should be able to fix the issue. Remember to exhaust all the possible software options before you consider switching out your audio card.